Jet pack for stock carburetor on 49cc watercool pocketbikes. Stock jet is .64mm - this kit contains .68, .70, .72, .74, .82, .84mm jets. Adjust your carb jetting to perform well with your other modifications!
|
List: $99.95
Price: $54.95
You Save: $45.00 (45 %)
High performance carb kit fits 43/49cc pocketbikes. 3D machining for optimum flow and performance. Carb features high and low speed tuning screws. 15mm bore carb with a 13.5mm venturi. Jet oversized by 25% comparing to Walbro 603 allowing Utimate Performa
|
The carb kit comes with everything shown in the picture for ultimum performance!
|
|
|
Main Jet for most 4-stroke carburetors are 0.75mm. This jet packs comes with a 0.91mm jet,, 0.95mm, 1.00mm jet, 0.83mm jet, 0.87mm jet, and a 0.79mm jet. This jet kit wont fit the 20mm to 26mm carburetor. It fits the 17mm, 18 mm, 19mm 4-stroke carbure
|
List: $89.95
Price: $62.95
You Save: $27.00 (30 %)
High performance watercool carb conversion kit for 47/49cc case reed inducted Pocket Bikes. Manifold features 3D machining for optimum flow and performance. This Carb Kit is tested to be the best you could find on the pocket bike industry today! It's easy
|
|
|
HP Carb. Adapter Plate fits Carb-119, Walbro 603 Carb. for 43/49cc pocketbikes. 3D machining for optimum flow and performance.
|
It fits HP CARB-318 and Walbro 603 for 47/49cc Caglari, Daytona, Lucky 7 Half/Full Fairing, Quart 4 pocket bikes.
|
19mm carburetor w/hand choke and wide intake manifold increases throttle response, low end torque and top end. Fits 50-110cc 4-Stroke Bikes.
|
|
4-Storke HP Fuel Link (4 feet)
|
Extra wide Intake Manifold increases throttle response, low end torque and top end. Fits 50-100cc 4-Stroke Bikes.
|
|
High performance Mikuni carburetor increases throttle response, low end torque and top end. Fits 50-100cc 4-Stroke Bikes.
|
|
|
For the Mikuni carburetor. It's 30m measured at the flange, and 26mm if taken at the slide down inside the carburetor.
|
Extra wide Intake Manifold increases throttle response, low end torque and top end. Fits 50-100cc 4-Stroke Bikes.
|
List: $99.95
Price: $54.95
You Save: $45.00 (45 %)
High performance carb kit for 47/49cc case reed inducted Pocket Bikes. Manifold features 3D machining for optimum flow and performance. Carb features high and low speed tuning screws. Carb and manifold have a 5/8" bore, while the carb has a 1/2" venturi.
|
Jet pack for stock carburetor on 47/49cc case reed inducted pocketbikes. Stock jet is .64mm - this kit contains .66, .68, .70, and .72mm jets. Adjust your carb jetting to perform well with your other modifications!
|
Billet intake manifold kit for '47/49cc' Chinese pocketbikes with case reed inducted engine. Manifold features 3D machining for optimum flow and performance. Kit includes mounting hardware and gaskets. Works with Walbro WA-167, WT-603, and WT-668 carburet
|